高端电压小交流电经过多次实验发现报告仪（耐弧光经过多次实验发现报告仪）-（求算机调控）

High voltage low current tester (arc resistance tester) - (computer control)

货名称大全称：耐电弧试验机

Product name: electric arc resistance tester

设备机型：NDH-A

Product model: NDH - A

能够满足标准：GB/T 1411-2002《固状绝缘层食材耐高压得过低功率弧光充放的做实验的时候》（同等IEC  61621-1997）及ASTM D495等规范标准的需求来设计创造的，并复合IEC 149、UL 746A等耐压方式方法

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

主耍可用范围之内及的功能：

本测验机是通过APP于减速机、电商落球回弹试验仪,介电击穿强度测定仪和家居电商落球回弹试验仪,介电击穿强度测定仪等行业领域的低压电工用氟塑料制品、硅橡胶胶和电电电电电绝缘漆等电电电电电绝缘相关的原材料的耐电孤特性评判，主中用物质电电电电电绝缘相关的原材料如：氟塑料制品、聚酯薄膜、硅橡胶、云母片、瓷砖、窗玻璃、电电电电电绝缘油、电电电电电绝缘漆、厚纸板等媒介的耐电孤特性测验；

本研究设计室设计机由来医学把握使用，能展示所选研究设计室状态下及研究设计室时候，研究设计室终结后并保护所选研究设计室信息，并可彩打.标试验报告格式。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 远程服务器为两边一起结构类型，下端为工作体系，顶部为经过多次实验发现箱。

2 本食品进行*新智力调整科技，能够 决定应用程序（IEC或ASTM）可智能对其进行试验报告，并在笔记本安卓手机体现 现场实验时和结论。

3 **耐磨性积极，抗干忧效率强，检查高精性好。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 焊弧通断时期计算误差：需小于 ±10ms

2 调压器使用量：2kVA

3 额定值试验报告电压电流：12.5kV

4 应力测试直流电压高精准度：±3%

5 功率管理表面粗糙度：±10%  直流电检测的的精密度：1.5%

6 探针对坯料气压：（0.5±0.05）N

7 参比电极建筑材料：钨棒

8 电极片距離：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 便用的环境摄氏度：（23±2）℃

10 动用氛围温湿度：（50±5）%

11 供电：220V±5%  50Hz  10A

12 可靠性试验    方式：   行业标准/美标/10 mA 间断/20 mA 维持/30 mA累计/40 mA间隔

13 实验流程如下所述：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 成品型号规格：

NDH-A    耐弧光校正仪-微机设定

NDH-B    耐电弧放电应力测试仪-摸屏管控

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！